P7 - Inject / Eject Mechanisms
Designed to secure electronics modules that are larger and heavier than just a line card or printed circuit board, these mechanisms insert and eject modules with one simple motion.They are even available in a tool-secured style to meet industry standards for restricted access.
A cam-handle design provides the leverage needed for larger applications.It provides a linear pull-up of 10 mm (.39") of travel between its fully extended and fully retracted positions.Closing motion forces pawl into frame and pulls it up tight.Opening motion forces door and frame apart, and withdraws pawl from frame.
- No tools required for installation – mechanism attaches to outer panel or door quickly and easily with a clip-on retainer
- Available in three different sizes to accommodate panels from 0.9 mm (.035") to 3.2 mm (.125") thick
- Available in tool-secured and non-secured styles
- Tool-secured style features a maximum recommended holding load greater than 400 N (90 lbs.) at an ambient temperature of 20ºC (68ºF)
- These mechanisms are rated for more than 200 insertion/extraction cycles of a 300 N (67 lb.) load at an ambient temperature of 25ºC (77ºF)
- Available with secondary catch to secure handle, in order to provide higher shock and vibration resistance while maintaining the convenience of tool-free access
- Also available with tool-secured access style (using a No.1 Phillips recess quarter-turn fastener) to meet appropriate industry standards where required
- Flammability rating: UL94-V0
- Tool-secured style helps meet UL 1950, IEC 950, and EN 60950 standards for restricted access
To search for a product certifications by part number, click here:
Product Certifications